Contact
Original Schaller Floyd Rose Tremolo Bars
These are the real deal, and will fit Original Floyd Rose, and Floyd Rose II tremolos with the
socket for the collared style bars. These come with a new socket to install into your bridge plate
in case yours is worn. Available in Gold, Chrome, Black, or Black for Left Handed.
Cavity Cover Plates
Brushed plastic covers look just like the
original Brushed black aluminum covers.
Any Style $12.00 each plate.
Covers Can be altered for the "Tremol-No"
Please Ask!
Polished Aluminum: $22.00 each plate
Economy Satin finish plastic plates
$12.00 each plate
Solid polished Brass: $25.00 each plate
Solid Brushed Brass: $25.00 each plate
"4 Hole" San Dimas/Ontario sized Plate
Black Brushed Aluminum Anodized
$25.00 each plate
Black Brushed Aluminum Anodized
$25.00 each plate (Also available
in the Tremolo Cover as well!)
Back Cover Plate Screws can be found Here on the Body Parts Page
Neck Plates
Solid Uncoated Brass Relic'd finish
$18.00 HWnp-1
Solid Uncoated Brass Brushed Finish:
$18.00 HWnp-2
Solid Brass Polished Finish:
$18.00 HWnp-3
Black Anodized Aluminum Finish
$17.00 HWnp-4
Solid Aluminum Polished Finish:
$16.00 HWnp-5
Solid Uncoated Aluminum Brushed Finish:
$15.00 HWnp-6
Black Plastic Backer Pads
for the neck plates are here!!
These will fit all my neckplates and other
standard Strat, Jackson and Charvel both
import and USA models.
$3.00 each HWnp-7
Strap Buttons, Screws & Felts can be found Here on the Body Parts Page
JackPlates, and Back Cover Plate Screws can be found Here on the Body Parts Page
JackPlates, and Back Cover Plate Screws can be found Here on the Body Parts Page
San Dimas Tremolo Bar Tips
Classic Style tips in Polished Brass And Aluminum
$18.00 each
Mid-Point Style tips in Polished Brass And Aluminum
$18.00 each
Mid-Point Style tips in Polished Aluminum = JCHMT-4A
Classic Style tips in Polished Aluminum = JCHCT-4A
Mid-Point Style tips in Polished Brass = JCHMT-4BR
Classic Style tips in Polished Brass = JCHCT-4BR
Mid-Point Style tips in Relic'd Brass = JCHMT-4RB
Classic Style tips in Relic'd Brass = JCHCT-4RB
*Notice, “Most” San Dimas models were one-off size plates so I will need a copy of your plate
if you’d like these made for you. Some of the covers through the mid 90’s and even now
into the Modern Day series are standard, but unfortunately there are just too many sizes and
variations to just be able to straight-up order one.
San Dimas Solid Brass & Aluminum String Trees and Risers
Natural Aluminum!!
Black Anodized Aluminum!!
Natural or Relic'd Brass!!
$15.00 each
JCH-3A
$15.00 each
JCH-3BA
Natural Aluminum!!
Black Anodized Aluminum!!
Natural or Relic'd Brass!!
$5.00 each (riser only)
JCH-5A
$5.00 each (riser only)
JCH-5BA
The brass and aluminum are not clear coated This means that they will tarnish as it's brass, not gold plated.
$15.00 each
Natural JCH-3BR
Relic’d JCH-3BRR
$5.00 each (riser only)
Natural JCH-5BR
Relic’d JCH-5BRR
Switch Tips For Switchcraft Switches are now available!
All switch tips shown HERE fit Switchcraft switches or any other
brand with an 8-32 thread shaft.Please note, some USA and MOST Import Jacksons and Charvels
came with METRIC threaded switch shafts, so these will not fit. I may be able to help with that though,
please send me an email with your interests.
Brass & Aluminum Jack Plates !
The brass are not clear coated, this means that they will tarnish as it's brass, not gold plating.
These are great solid brass replacements for the
brass jack plates as found on some of the
older Charvels and Schecters.
The brass are not clear coated
This means that they will tarnish as it's
brass, not gold plating.
They also fit Gibson Les Pauls perfectly as well.
These specific jackplates will
come flat unless noted by you.
Relic'd finish :
$18.00
HWjp-1
Polished Finish:
$18.00
HWjp-2
$18.00
Each
HWjp-3
Older Oversized Oval "Dimas Strathead"
Charvel & Jackson Jackplates
Made from the same very thin Aluminum
as the originals were.
These are available in Black Brushed Anodized,
Polished, or Natural Brushed Aluinum.
These can also be in the curved or flat shape
for different needs. Let me know.
Original Style San Dimas Tremolo Bars
These are the correct shape and length of the original San Dimas Tremolo Bars. Can be made
with the bend or left straight. Tip is included and can be chosen from the options below
Left Handed is available as well.
TB-SDTB
$40.00
Engraving is available
on all Neckplates
New “Industrious” Pattern
These are milled to a grid pattern and can be anodized or just left natural.
TB-SFLR-B(Temporarily Unavailable)(Black), TB-SFLR-G(Gold),
$31.00 each $37.00 each
TB-SFLR-C(Silver) or TB-SFLR-BL (*lefty)(Lefty-Black)
$27.00 each $31.00 each
The brass and aluminum are not clear coated This means that they will tarnish as it's brass, not gold plated.
These are made from solid 1/8th inch thick stock.
These are the standard Fender, Charvel Jackson Bolt pattern.
