Contact
Updated: 5/3/2013
**I DO NOT SELL COMPLETE TREMOLO SYSTEMS!**
NOTE: To all the left handed players out there.
I can do lefty versions of every bar I make, so no worries about finding or paying extra just
because you're a lefty!
When ordering with a part number, please add G (Gold), GB (Gold brushed) or SS
(stainless), or SSB (Stainless Steel brushed).
Stainless Steel brushed finish for all bars unless you specify otherwise.
For example: If you'd like a Yamaha RM Pro bar in polished Stainless Steel to match chrome,
the part number would be: TB-RMPro-SS
Black is not available on any of my bars (except for the Conversion bars below)
as I don't have any black plating capabilities.
Black paint won't hold up, and powder coating is too thick for the tolerancing of these bars.
Floyd Rose, Ibanez, and JT6 Jackson
String Lock Screws
.40 cents
each screw
Floyd Rose,
Ibanez, and JT6 Jackson String Lock Screws
with Allen Wrench
$2.00 a set
(3 screws & Wrench)
Kahler "Behind the Nut" String Lock Screws
Kahler "Behind the Nut"
String Lock Screws
with Allen Wrench
Fender System Series String Lock
Replacement Screws
Fender System
Series String Lock Replacement Screw
with Allen Wrench
Fender System Series, Floyd Rose,
Ibanez, and JT6 Jackson
Allen Wrench Alone
$1.50 each
Kahler "Behind the Nut" Allen Wrench
$1.50 each
Washburn Wonderbar 2001 String Lock Screws
Only available in Black
(example of the string lock)
.40 cents each
Set of 6 for $2.00
Kahler "Floyd Style" Locking Nut Screws
Kahler "Floyd Style" Locking Nut Screws
with Allen Wrench
.40 cents
each screw
.40 cents
each screw
.40 cents
each screw
$2.00 a set
(3 screws & Wrench)
$2.00 a set
(3 screws & Wrench)
$2.00 a set
(3 screws & Wrench)
Original Schaller Floyd Rose Tremolo Bars
These are the real deal, and will fit Original Floyd Rose, and Floyd Rose II
tremolos with the socket for the collared style bars. These come with a
new socket to install into your bridge plate in case yours is worn. Available
in Gold, Chrome, Black, or Black for Left Handed.
TB-SFLR $20.00
**NOTE**
Black only for Lefties
Unfortunately these are NOT available for left handers in Chrome or Gold as I do not make
these bars, I just modify the socket for the tremolo.
I can now offer a service that will allow you to mount a modern Floyd Rose type tremolo bar
with the friction collar built in.
The only thing you have to do is remove your old tremolo socket and replace it with the new one
that I have modified to fit the hole where your old socket went.
Yes the bar is included!
Click for Tutorial
No more bushings for those of you who do not like them ;o)
Available in Gold, Chrome, and Black.
$27.00 each.
If you'd like just the socket for these, those are available as well.
TB-SFLRS
$5.00
Service is now available for the JT6 Jackson
Logo'd Tremolos shown below:
An example of a JT6 Tremolo:
If you need the Allen wrench (3mm) for the installation, see below ....
If you need the Allen wrench (3mm) for the
installation, I have those as well.
$1.00 Each
Ibanez Edge / PowerRocker Tremolo
Bar Bushings:
Please note, these bushings will not
fit the original JT6 tremolo bars.
$2.00 each bushing
Ibanez Edge Tremolo Bar / Floyd Rose Conversion Bars
Tired of that bar flopping around, and you'd like to actually put into a specific position?
Now you can have the same features of the modern day Floyd Rose bar on your Edge Trem!
Please see the Jackson/Charvel Conversion bar tutorial for the same exact installation.
Click for Tutorial
Yes the bar is included!
Black : TB-EDGB $30.00
Chrome: TB-EDGC $30.00
Gold: TB-EDGG $32.00
Ibanez Maxxas and Artfield "HQ" Tremolo Bar in Solid Stainless Steel
These are made from solid polished or brushed stainless steel only.
Replacement screws can be found here
With "faux" Tip
(machined groove to
simulate a separate tip):
TB-HQ
$28.00
Examples of the HQ Bridges:
Artfield:
Maxxas :
Fender Tremolo Parts
Fender System II (2) and III (3) Tremolo Bar Conversions
If you're tired of looking for a bar for that System 2 or 3, I can help by supplying a modern type
Floyd bar that will fit right in the existing hole in the tremolo base plate.
There are no modifications that you must make, just unscrew the nuts that are holding in the
existing socket and replace it with this one. Click for Tutorial for the System III(3)
These should actually work for the Elite and Free Flyte as well but have not tested those yet. If
yoiu’re interested in testing one, please let me know.
Yes the bar is included!
Chrome Only
$27.00 each.
If you need the Allen wrench (3mm) for the installation, see below ....
If you need the Allen wrench (3mm) for the
installation, I have those as well.
$1.00
Fender System I Tremolo Bars
These are made from solid polished or brushed stainless steel only and
will not rust peel or chip.
TB-SYS1 - $27.00
Mine are exactly like the original bar and just pop right in.
Please be aware of other companies selling bars for the System one,
they are not the correct size and require permanent
modification to your tremolo!
Solid Aircraft Aluminum tremolo
bar Friction Collar for the
Fender System 1 tremolo.
These are a direct replacement and a much
better upgrade as you do not need a separate
tool to tighten the collar. Just tighten up the
nicely knurled collar and put the bar where YOU
want it! Natural and
Black anodized aluminum now available!
$20.00
each
Natural
Aluminum
Black Anodized
Aluminum
System I Trem arm bushings
These are the plastic bushing that fits
between the round, chrome friction nut
and the arm socket in the base plate.
Angled side faces up into the Friction Collar.
The bushing is the black ring in the photo (right).
$12.00 each
Fender System I Stainless Steel Fine Tuners
These are made from solid stainless steel
and are not soft and weak.
Fender Elite Bass Stainless Steel
Fine Tuners
These have domed thread ends and are made
from solid stainless steel and are not soft and weak.
$6.00
each screw
HWft-2B
$6.00 each screw
HWft-2B
Also available in sets
of 6 for $28.00
System 1 Fine Tuner and Tremolo Bar Repairs
Fine Tuner Repair:
If you've found that you have stripped out the threads for your fine tuners, I can easily rethread
these with a slightly larger size thread, and provide a fine tuner that will function like new again.
I can either do just one, or all 6 for you. The total for this service for all 6 fine tuners would be
$45.00 plus the shipping back to you. If you have any questions, I'll be happy to help in any way
I can!
Tremolo Bar Repair / Conversions:
If you have missing or broken parts on your System 1 Tremolo, I can help get you back into
action with a conversion service that I provide. I can help you (or do it for you) give your trem
new life with a modern Floyd Type Tremolo Bar!
Read below if you're mechanically inclined and you're not afraid to use power tools.
If you can use a drill and you're comfortable drilling out the tremolo socket hole in your bridge,
you won't even have to send the bridge to me. All you have to do is be able to hold your bridge
in a suitable vise or clamp and drill out the existing hole to a slightly larger size.
Email me for details! Available in Gold, Chrome, and Black. $27.00 each.
If you need the Allen wrench (3mm) for the installation, I have those as well. $1.00
Read this if you'd rather have me do all the work for you!
If you're not up to the task of doing it yourself, I can do it for you. All that is required is that you
send the bridge to me and I'll take care of the rest for you.
Cost of the service which includes the bar is $42.00 plus the shipping back to you.
Email with any questions you may have!
Yes the bar is included!
San Dimas Tremolo Bar Tips
Classic Style tips in Polished Brass And Aluminum
$15.00 each
Mid-Point Style tips in Polished Brass And Aluminum
$15.00 each
Mid-Point Style tips in Polished Aluminum = JCHMT-4A
Classic Style tips in Polished Aluminum = JCHCT-4A
Mid-Point Style tips in Polished Brass = JCHMT-4BR
Classic Style tips in Polished Brass = JCHCT-4BR
Mid-Point Style tips in Relic'd Brass = JCHMT-4RB
Classic Style tips in Relic'd Brass = JCHCT-4RB
Wasburn Tremolo Bars
Washburn N2 600S Floyd Rose - Available in Polished Stainless Steel only (matches chrome)
$28.00 TB-TRS
Wonderbar Tremolo Bars -Available in Polished Stainless Steel and
Polished Hardened Brass (matches gold!). It's better than chrome or gold plating because it will never
chip or peel or rust! These are for the Friction Collared style trems only.
$28.00 TB-2001
Washburn Wonderbar Tremolo Socket Bushings
These are the little black bushings that tighten up
the trem arm when turning the "friction" collar
around the arm. 1 Required.
Angled side faces down into the Tremolo bar socket.
$12.00
The "Non-Collared" Washburn ( SHIFT ) Wonderbar Tremolo
I'm now making the tremolo bars for the "other" style model of these tremolos where they do NOT use
the friction collar, as the bar just screws right in like a Strat. TB-2001NC $28.00
$20.00
each
Washburn Fine Tuner Washers
This is a set of 6 Black Delrin Washers for the
Washburn / Shift 2001 Tremolo. These are the
thin black washers that act as cushions
for the fine tuners.
$12.00 for the
set of 6 pcs.
ESP Tremolo Bars
Nice original style tremolo bars that fit the original Logo'd ESP tremolos. I've had some
questions on this trem as I'm hearing there are 2 different sockets for these. These are made
from solid polished or brushed stainless steel only.
TB-Sync $28.00
Here's a closer pic of the type of
socket that I make the bars for:
Example of the ESP tremolo:
ESP Logo'd Tremolo Saddle/String
Locking Screws
These are the perfect replacements
for your missing screws!
Sold in sets of
6 for $3.00
HWscw-26
ESP Synclair Adapters !!
Ok, so I've been helped out by a few customers (thanks guys!) with some info on the other threaded
collar type tremolo bar and unfortunately, I will not be manufacturing these bars as it's just too
involved for how many requests I get for it. But,I have made an adapter that will fit the threaded socket
of the base plate, that will allow you to fit a modern Floyd type tremolo bar into it.
Now I've machined these to fit a specific bar that I get from my supplier so it will match correctly.
Not all of these modern Floyd type bars run the same size so you're gambling if you just want the
adapter alone. There are 2 wrench flats that will allow you to snug this into the base plate
but there is no need to over tighten these. These are hardened/heat treated steel for optimum wear.
For both the adapter and tremolo bar, the price is $40.00. For the adapter alone, it's $25.00
A reference picture of the adapter.
(yes, I know it's not the ESP bridge in the picture but I had to send the original bridge back
to the customer ;o))
Here are a couple of pics for reference of the tremolo sockets that this adapter will fit:
YAMAHA Tremolo Bars
Nice original style tremolo bars that fit the original RM-Pro (with Pop-in Bar), RM-Pro II (with
Pop-in Bar), Vintage Pro (with Pop-in Bar), and *Rockin' Magic II (Threaded Bar)* tremolos.
These are made from solid polished or brushed stainless steel or Brass.
A note about the brass bars.
They have a slight step that can be seen in the pic below because these are a metric bar size
and I have yet to find a good (dependable / reasonable) metric source for brass roundstock.
The step does not hurt a thing, and is hardly even noticeable but I just wanted you to be aware
of it.
TB-RMPro
$28.00
Fits the following 3 trems below:
RM-Pro,
RM Pro II
Vintage Pro
YAMAHA TRS Pro These are made from solid polished or brushed stainless steel
TB-TRS
$28.00
YAMAHA Rockin' Magic II These are made from solid polished or brushed stainless steel
TB-RMagII
$28.00
Fits the following trem below:
Takeuchi / TRS-Pro / TRS 101 These are made from solid polished or brushed stainless steel
TB-TRS
$28.00
RM-Pro Tremolo Friction Collars
These are the perfect replacement for the Friction
Collars that seem to grow feet and walk away.
These are black anodized aluminum and will fit the
original RM-Pro (with Pop-in Bar).
Notice, I've removed the RM Pro II (only!)
from the list of tremolos that use this friction collar
because apparently, Yamaha had changed design
through production on these. If you'd like to take a shot
at ordering one, feel free, but I can not guarantee
that it will fit your RM Pro II Tremolo.
$20.00 Each
Black Anodized
Aluminum:
HWyfcr-1
RM-Pro Tremolo Bar Friction bushings
These are the Delrin bushing shown in the picture
below being pointed to by the black arrow.
Angled side faces down into the Tremolo bar socket.
This is for the bushing only!
By VERY popular demand, In the future,
I will be making the threaded outer metal collar
(Friction Screw) out of Stainless Steel for you.
$12.00 Each
HWyfb-1
Email Me: HERE
Lock Nut & String Lock Screws & Wrenches
Washburn Friction collars for the
Wonderbar/2001/Shift tremolo are
available in Black anodized aluminum or
Solid Natural Brass.
Charvel Surfcaster (JT490) Tremolo Bars! These also fit the tremolos on the ST Models
These are the hard to find tremolo bars for the JT490 Tremolo and are made from solid
polished stainless steel only. Will not rust peel or chip. TB-490 $25.00.
JT490 Tremolo:
"ST" Tremolo:
Replacement screws can be found here
Updated: 5/3/2013
**I DO NOT SELL COMPLETE TREMOLO SYSTEMS!**
NOTE: To all the left handed players out there.
I can do lefty versions of every bar I make, so no worries about finding or paying extra just
because you're a lefty!
When ordering with a part number, please add G (Gold), GB (Gold brushed) or SS
(stainless), or SSB (Stainless Steel brushed).
Stainless Steel brushed finish for all bars unless you specify otherwise.
For example: If you'd like a Yamaha RM Pro bar in polished Stainless Steel to match chrome,
the part number would be: TB-RMPro-SS
Black is not available on any of my bars (except for the Conversion bars below)
as I don't have any black plating capabilities.
Black paint won't hold up, and powder coating is too thick for the tolerancing of these bars.
Floyd Rose, Ibanez, and JT6 Jackson
String Lock Screws
.40 cents
each screw
Floyd Rose,
Ibanez, and JT6 Jackson String Lock Screws
with Allen Wrench
$2.00 a set
(3 screws & Wrench)
Kahler "Behind the Nut" String Lock Screws
Kahler "Behind the Nut"
String Lock Screws
with Allen Wrench
Fender System Series String Lock
Replacement Screws
Fender System
Series String Lock Replacement Screw
with Allen Wrench
Fender System Series, Floyd Rose,
Ibanez, and JT6 Jackson
Allen Wrench Alone
$1.50 each
Kahler "Behind the Nut" Allen Wrench
$1.50 each
Washburn Wonderbar 2001 String Lock Screws
Only available in Black
(example of the string lock)
.40 cents each
Set of 6 for $2.00
Kahler "Floyd Style" Locking Nut Screws
Kahler "Floyd Style" Locking Nut Screws
with Allen Wrench
.40 cents
each screw
.40 cents
each screw
.40 cents
each screw
$2.00 a set
(3 screws & Wrench)
$2.00 a set
(3 screws & Wrench)
$2.00 a set
(3 screws & Wrench)
Original Schaller Floyd Rose Tremolo Bars
These are the real deal, and will fit Original Floyd Rose, and Floyd Rose II
tremolos with the socket for the collared style bars. These come with a
new socket to install into your bridge plate in case yours is worn. Available
in Gold, Chrome, Black, or Black for Left Handed.
TB-SFLR $20.00
**NOTE**
Black only for Lefties
Unfortunately these are NOT available for left handers in Chrome or Gold as I do not make
these bars, I just modify the socket for the tremolo.
I can now offer a service that will allow you to mount a modern Floyd Rose type tremolo bar
with the friction collar built in.
The only thing you have to do is remove your old tremolo socket and replace it with the new one
that I have modified to fit the hole where your old socket went.
Yes the bar is included!
Click for Tutorial
No more bushings for those of you who do not like them ;o)
Available in Gold, Chrome, and Black.
$27.00 each.
If you'd like just the socket for these, those are available as well.
TB-SFLRS
$5.00
Service is now available for the JT6 Jackson
Logo'd Tremolos shown below:
An example of a JT6 Tremolo:
If you need the Allen wrench (3mm) for the installation, see below ....
If you need the Allen wrench (3mm) for the
installation, I have those as well.
$1.00 Each
Ibanez Edge / PowerRocker Tremolo
Bar Bushings:
Please note, these bushings will not
fit the original JT6 tremolo bars.
$2.00 each bushing
Ibanez Edge Tremolo Bar / Floyd Rose Conversion Bars
Tired of that bar flopping around, and you'd like to actually put into a specific position?
Now you can have the same features of the modern day Floyd Rose bar on your Edge Trem!
Please see the Jackson/Charvel Conversion bar tutorial for the same exact installation.
Click for Tutorial
Yes the bar is included!
Black : TB-EDGB $30.00
Chrome: TB-EDGC $30.00
Gold: TB-EDGG $32.00
Ibanez Maxxas and Artfield "HQ" Tremolo Bar in Solid Stainless Steel
These are made from solid polished or brushed stainless steel only.
Replacement screws can be found here
With "faux" Tip
(machined groove to
simulate a separate tip):
TB-HQ
$28.00
Examples of the HQ Bridges:
Artfield:
Maxxas :
Fender Tremolo Parts
Fender System II (2) and III (3) Tremolo Bar Conversions
If you're tired of looking for a bar for that System 2 or 3, I can help by supplying a modern type
Floyd bar that will fit right in the existing hole in the tremolo base plate.
There are no modifications that you must make, just unscrew the nuts that are holding in the
existing socket and replace it with this one. Click for Tutorial for the System III(3)
These should actually work for the Elite and Free Flyte as well but have not tested those yet. If
yoiu’re interested in testing one, please let me know.
Yes the bar is included!
Chrome Only
$27.00 each.
If you need the Allen wrench (3mm) for the installation, see below ....
If you need the Allen wrench (3mm) for the
installation, I have those as well.
$1.00
Fender System I Tremolo Bars
These are made from solid polished or brushed stainless steel only and
will not rust peel or chip.
TB-SYS1 - $27.00
Mine are exactly like the original bar and just pop right in.
Please be aware of other companies selling bars for the System one,
they are not the correct size and require permanent
modification to your tremolo!
Solid Aircraft Aluminum tremolo
bar Friction Collar for the
Fender System 1 tremolo.
These are a direct replacement and a much
better upgrade as you do not need a separate
tool to tighten the collar. Just tighten up the
nicely knurled collar and put the bar where YOU
want it! Natural and
Black anodized aluminum now available!
$20.00
each
Natural
Aluminum
Black Anodized
Aluminum
System I Trem arm bushings
These are the plastic bushing that fits
between the round, chrome friction nut
and the arm socket in the base plate.
Angled side faces up into the Friction Collar.
The bushing is the black ring in the photo (right).
$12.00 each
Fender System I Stainless Steel Fine Tuners
These are made from solid stainless steel
and are not soft and weak.
Fender Elite Bass Stainless Steel
Fine Tuners
These have domed thread ends and are made
from solid stainless steel and are not soft and weak.
$6.00
each screw
HWft-2B
$6.00 each screw
HWft-2B
Also available in sets
of 6 for $28.00
System 1 Fine Tuner and Tremolo Bar Repairs
Fine Tuner Repair:
If you've found that you have stripped out the threads for your fine tuners, I can easily rethread
these with a slightly larger size thread, and provide a fine tuner that will function like new again.
I can either do just one, or all 6 for you. The total for this service for all 6 fine tuners would be
$45.00 plus the shipping back to you. If you have any questions, I'll be happy to help in any way
I can!
Tremolo Bar Repair / Conversions:
If you have missing or broken parts on your System 1 Tremolo, I can help get you back into
action with a conversion service that I provide. I can help you (or do it for you) give your trem
new life with a modern Floyd Type Tremolo Bar!
Read below if you're mechanically inclined and you're not afraid to use power tools.
If you can use a drill and you're comfortable drilling out the tremolo socket hole in your bridge,
you won't even have to send the bridge to me. All you have to do is be able to hold your bridge
in a suitable vise or clamp and drill out the existing hole to a slightly larger size.
Email me for details! Available in Gold, Chrome, and Black. $27.00 each.
If you need the Allen wrench (3mm) for the installation, I have those as well. $1.00
Read this if you'd rather have me do all the work for you!
If you're not up to the task of doing it yourself, I can do it for you. All that is required is that you
send the bridge to me and I'll take care of the rest for you.
Cost of the service which includes the bar is $42.00 plus the shipping back to you.
Email with any questions you may have!
Yes the bar is included!
San Dimas Tremolo Bar Tips
Classic Style tips in Polished Brass And Aluminum
$15.00 each
Mid-Point Style tips in Polished Brass And Aluminum
$15.00 each
Mid-Point Style tips in Polished Aluminum = JCHMT-4A
Classic Style tips in Polished Aluminum = JCHCT-4A
Mid-Point Style tips in Polished Brass = JCHMT-4BR
Classic Style tips in Polished Brass = JCHCT-4BR
Mid-Point Style tips in Relic'd Brass = JCHMT-4RB
Classic Style tips in Relic'd Brass = JCHCT-4RB
Wasburn Tremolo Bars
Washburn N2 600S Floyd Rose - Available in Polished Stainless Steel only (matches chrome)
$28.00 TB-TRS
Wonderbar Tremolo Bars -Available in Polished Stainless Steel and
Polished Hardened Brass (matches gold!). It's better than chrome or gold plating because it will never
chip or peel or rust! These are for the Friction Collared style trems only.
$28.00 TB-2001
Washburn Wonderbar Tremolo Socket Bushings
These are the little black bushings that tighten up
the trem arm when turning the "friction" collar
around the arm. 1 Required.
Angled side faces down into the Tremolo bar socket.
$12.00
The "Non-Collared" Washburn ( SHIFT ) Wonderbar Tremolo
I'm now making the tremolo bars for the "other" style model of these tremolos where they do NOT use
the friction collar, as the bar just screws right in like a Strat. TB-2001NC $28.00
$20.00
each
Washburn Fine Tuner Washers
This is a set of 6 Black Delrin Washers for the
Washburn / Shift 2001 Tremolo. These are the
thin black washers that act as cushions
for the fine tuners.
$12.00 for the
set of 6 pcs.
ESP Tremolo Bars
Nice original style tremolo bars that fit the original Logo'd ESP tremolos. I've had some
questions on this trem as I'm hearing there are 2 different sockets for these. These are made
from solid polished or brushed stainless steel only.
TB-Sync $28.00
Here's a closer pic of the type of
socket that I make the bars for:
Example of the ESP tremolo:
ESP Logo'd Tremolo Saddle/String
Locking Screws
These are the perfect replacements
for your missing screws!
Sold in sets of
6 for $3.00
HWscw-26
ESP Synclair Adapters !!
Ok, so I've been helped out by a few customers (thanks guys!) with some info on the other threaded
collar type tremolo bar and unfortunately, I will not be manufacturing these bars as it's just too
involved for how many requests I get for it. But,I have made an adapter that will fit the threaded socket
of the base plate, that will allow you to fit a modern Floyd type tremolo bar into it.
Now I've machined these to fit a specific bar that I get from my supplier so it will match correctly.
Not all of these modern Floyd type bars run the same size so you're gambling if you just want the
adapter alone. There are 2 wrench flats that will allow you to snug this into the base plate
but there is no need to over tighten these. These are hardened/heat treated steel for optimum wear.
For both the adapter and tremolo bar, the price is $40.00. For the adapter alone, it's $25.00
A reference picture of the adapter.
(yes, I know it's not the ESP bridge in the picture but I had to send the original bridge back
to the customer ;o))
Here are a couple of pics for reference of the tremolo sockets that this adapter will fit:
YAMAHA Tremolo Bars
Nice original style tremolo bars that fit the original RM-Pro (with Pop-in Bar), RM-Pro II (with
Pop-in Bar), Vintage Pro (with Pop-in Bar), and *Rockin' Magic II (Threaded Bar)* tremolos.
These are made from solid polished or brushed stainless steel or Brass.
A note about the brass bars.
They have a slight step that can be seen in the pic below because these are a metric bar size
and I have yet to find a good (dependable / reasonable) metric source for brass roundstock.
The step does not hurt a thing, and is hardly even noticeable but I just wanted you to be aware
of it.
TB-RMPro
$28.00
Fits the following 3 trems below:
RM-Pro,
RM Pro II
Vintage Pro
YAMAHA TRS Pro These are made from solid polished or brushed stainless steel
TB-TRS
$28.00
YAMAHA Rockin' Magic II These are made from solid polished or brushed stainless steel
TB-RMagII
$28.00
Fits the following trem below:
Takeuchi / TRS-Pro / TRS 101 These are made from solid polished or brushed stainless steel
TB-TRS
$28.00
RM-Pro Tremolo Friction Collars
These are the perfect replacement for the Friction
Collars that seem to grow feet and walk away.
These are black anodized aluminum and will fit the
original RM-Pro (with Pop-in Bar).
Notice, I've removed the RM Pro II (only!)
from the list of tremolos that use this friction collar
because apparently, Yamaha had changed design
through production on these. If you'd like to take a shot
at ordering one, feel free, but I can not guarantee
that it will fit your RM Pro II Tremolo.
$20.00 Each
Black Anodized
Aluminum:
HWyfcr-1
RM-Pro Tremolo Bar Friction bushings
These are the Delrin bushing shown in the picture
below being pointed to by the black arrow.
Angled side faces down into the Tremolo bar socket.
This is for the bushing only!
By VERY popular demand, In the future,
I will be making the threaded outer metal collar
(Friction Screw) out of Stainless Steel for you.
$12.00 Each
HWyfb-1
Email Me: HERE
Lock Nut & String Lock Screws & Wrenches
Washburn Friction collars for the
Wonderbar/2001/Shift tremolo are
available in Black anodized aluminum or
Solid Natural Brass.
Charvel Surfcaster (JT490) Tremolo Bars! These also fit the tremolos on the ST Models
These are the hard to find tremolo bars for the JT490 Tremolo and are made from solid
polished stainless steel only. Will not rust peel or chip. TB-490 $25.00.
JT490 Tremolo:
"ST" Tremolo:
Replacement screws can be found here