Contact
Original Style Jackson Charvel Strap Buttons, Screws & Felts
The brass are not clear coated, this means that they will tarnish as it's brass, not gold plating.
$1.00
each screw
HWsb-16
$1.00 per pair
HWsbF
Yamaha SE, RGX Rear (Tremolo and Control Route)
Cover Plate Screws
Back Cover Plate Screws
Screws may not look like perfect reproductions, but these are the closest to original you will find in fit and fiinish.
Ibanez Rear Cover Plate Screws In Black or Chrome
Import Black Back Plate Screws Fits
Charvel, ESP,Kramer
.30 cents each screw
HWsc-6
.30 cents each screw
HWsc-5
.30 cents each screw
HWsc-4
.45 cents each screw
Black
HWsc-7
Chrome
HWsc-7C
.45 cents each screw
Black HWsc-8B
Chrome HWsc-8C
.45 cents each screw
HWsc-8
Jackson / Charvel JT6 Floyd Tremolo
Bushings Covers available!
These originally came on the earlier USA Models
that had the JT6 tremolo installed to cover
up the "sloppy" paint edge around the bushing hole.
These were lightly pressed into the paint
but would usually come lose and get lost
if removing the trem for maintenance.
Bushings without
bushing covers:
Bushings with the
Bushing covers
installed:
$8.00 per pair
JCH-2C
Brass & Aluminum Jack Plates !
The brass are not clear coated, this means that they will tarnish as it's brass, not gold plating.
These are great solid brass replacements for the
brass jack plates as found on some of the
older Charvels and Schecters.
The brass are not clear coated
This means that they will tarnish as it's
brass, not gold plating.
They also fit Gibson Les Pauls perfectly as well.
These specific jackplates will
come flat unless noted by you.
$18.00
Each
HWjp-3
Newer "Football" Jackplates
The brass are not clear coated
This means that they will tarnish as it's
brass, not gold plating.
Will fit Ibanez, Charvel, Jackson guitars
Aluminum Black Anodized, polished or brushed brass,
and polished or brushed
aluminum.
NOTE: The Black Chrome Steel
Jackplate P/N:HWjp-6ST, is NOT made by me,
but is a perfect fit for the Jackson Charvel and Ibanez
and ESP bodies.
$18.00 Each:
Brass/Brushed
HWjp-4
Brass/Polished
HWjp-8
Brass/Relic'd
HWjp-9
Brushed/Aluminum:
HWjp-101
Polished/Aluminum:
HWjp-5
Black Brushed
Aluminum
HWjp-6
GOTOH Battery Boxes
Can be installed in the body after it's been routed
by you or these can be installed in your rear cover
plates (if there's room!), which I can do here for you.
Please click here for details.
$12.00
Each
HWbc-1
A few examples of the box mounted into Covers:
A few important dimensions you might like:
L= 2-3/4" X W= 1-9/64ths"
Depth is as shown to the right where it's 1-5/16ths
from under the mounting lip.
Relic'd Brass
$22.00 per pair
HWsb-1
Natural Brass
$22.00 per pair
HWsb-2
Aluminum
$22.00 per pair
HWsb-3
Black Anodized
Aluminum
$24.00 per pair
HWsb-4
Strap Button Screws
in Stainless Steel
Strap Button
Felts in Black
(these are the nice
dense type cushions)
USA Charvel and Jackson Back-plate Screws
in black
USA Charvel and Jackson Back-plate Screws
in Gold
USA Charvel and Jackson Back-plate Screws
in chrome
Email Me: HERE
Original Kramer Style Brass and Aluminum Strap Buttons
The brass are not clear coated, this means that they will tarnish as it's brass, not gold plating.
Relic'd Brass
$22.00 per pair
HWksb-1
Natural Brass
$22.00 per pair
HWksb-2
Aluminum
$22.00 per pair
HWksb-3
Black Anodized
Aluminum
$24.00 per pair
HWksb-4
Black Chrome
Steel
HWjp-6ST
$.50 Each
or
$.80 for a set of 2
HWYsc-1
Yamaha Battery Plate Screws (2 Pieces) Phillips Head
Black,
Older Oversized Oval "Dimas Strathead"
Charvel & Jackson Jackplates
Made from the same very thin Aluminum
as the originals were.
These are available in Black Brushed Anodized,
Polished, or Natural Brushed Aluinum.
These can also be in the curved or flat shape
for different needs. Let me know.
Relic'd Brass finish :
$18.00
HWjp-1
Polished Brass Finish:
$18.00
HWjp-2
Polished Aluminum
HWjp-2A
$18.00
Original Style Jackson Charvel Strap Buttons, Screws & Felts
The brass are not clear coated, this means that they will tarnish as it's brass, not gold plating.
$1.00
each screw
HWsb-16
$1.00 per pair
HWsbF
Yamaha SE, RGX Rear (Tremolo and Control Route)
Cover Plate Screws
Back Cover Plate Screws
Screws may not look like perfect reproductions, but these are the closest to original you will find in fit and fiinish.
Ibanez Rear Cover Plate Screws In Black or Chrome
Import Black Back Plate Screws Fits
Charvel, ESP,Kramer
.30 cents each screw
HWsc-6
.30 cents each screw
HWsc-5
.30 cents each screw
HWsc-4
.45 cents each screw
Black
HWsc-7
Chrome
HWsc-7C
.45 cents each screw
Black HWsc-8B
Chrome HWsc-8C
.45 cents each screw
HWsc-8
Jackson / Charvel JT6 Floyd Tremolo
Bushings Covers available!
These originally came on the earlier USA Models
that had the JT6 tremolo installed to cover
up the "sloppy" paint edge around the bushing hole.
These were lightly pressed into the paint
but would usually come lose and get lost
if removing the trem for maintenance.
Bushings without
bushing covers:
Bushings with the
Bushing covers
installed:
$8.00 per pair
JCH-2C
Brass & Aluminum Jack Plates !
The brass are not clear coated, this means that they will tarnish as it's brass, not gold plating.
These are great solid brass replacements for the
brass jack plates as found on some of the
older Charvels and Schecters.
The brass are not clear coated
This means that they will tarnish as it's
brass, not gold plating.
They also fit Gibson Les Pauls perfectly as well.
These specific jackplates will
come flat unless noted by you.
$18.00
Each
HWjp-3
Newer "Football" Jackplates
The brass are not clear coated
This means that they will tarnish as it's
brass, not gold plating.
Will fit Ibanez, Charvel, Jackson guitars
Aluminum Black Anodized, polished or brushed brass,
and polished or brushed
aluminum.
NOTE: The Black Chrome Steel
Jackplate P/N:HWjp-6ST, is NOT made by me,
but is a perfect fit for the Jackson Charvel and Ibanez
and ESP bodies.
$18.00 Each:
Brass/Brushed
HWjp-4
Brass/Polished
HWjp-8
Brass/Relic'd
HWjp-9
Brushed/Aluminum:
HWjp-101
Polished/Aluminum:
HWjp-5
Black Brushed
Aluminum
HWjp-6
GOTOH Battery Boxes
Can be installed in the body after it's been routed
by you or these can be installed in your rear cover
plates (if there's room!), which I can do here for you.
Please click here for details.
$12.00
Each
HWbc-1
A few examples of the box mounted into Covers:
A few important dimensions you might like:
L= 2-3/4" X W= 1-9/64ths"
Depth is as shown to the right where it's 1-5/16ths
from under the mounting lip.
Relic'd Brass
$22.00 per pair
HWsb-1
Natural Brass
$22.00 per pair
HWsb-2
Aluminum
$22.00 per pair
HWsb-3
Black Anodized
Aluminum
$24.00 per pair
HWsb-4
Strap Button Screws
in Stainless Steel
Strap Button
Felts in Black
(these are the nice
dense type cushions)
USA Charvel and Jackson Back-plate Screws
in black
USA Charvel and Jackson Back-plate Screws
in Gold
USA Charvel and Jackson Back-plate Screws
in chrome
Email Me: HERE
Original Kramer Style Brass and Aluminum Strap Buttons
The brass are not clear coated, this means that they will tarnish as it's brass, not gold plating.
Relic'd Brass
$22.00 per pair
HWksb-1
Natural Brass
$22.00 per pair
HWksb-2
Aluminum
$22.00 per pair
HWksb-3
Black Anodized
Aluminum
$24.00 per pair
HWksb-4
Black Chrome
Steel
HWjp-6ST
$.50 Each
or
$.80 for a set of 2
HWYsc-1
Yamaha Battery Plate Screws (2 Pieces) Phillips Head
Black,
Older Oversized Oval "Dimas Strathead"
Charvel & Jackson Jackplates
Made from the same very thin Aluminum
as the originals were.
These are available in Black Brushed Anodized,
Polished, or Natural Brushed Aluinum.
These can also be in the curved or flat shape
for different needs. Let me know.
Relic'd Brass finish :
$18.00
HWjp-1
Polished Brass Finish:
$18.00
HWjp-2
Polished Aluminum
HWjp-2A
$18.00
