|
| | 
Page 4: Pics & Testimonials
(just click on the pics to
see larger pics!)
|
"Hey,
Here's the picture of the Schecter C7. Looks 100% better with the pickup
rings I got from you, and some other chrome hardware. I'll definitely
recommend you to anyone looking for quality parts, especially 7 string
pickup rings, as they are almost non-existent. Thanks again!
Stan Rodak"
What a great looking guitar, and may
I say the pickup rings look fantastic as well, but I'm a bit biased lol!
I wanted to let you know how pleased I am with the custom
made pickup rings you made. They fit perfectly and give my bass even more of
a refined look. I also appreciate your quick e-mail responses and how fast
you had these in the mail. I have already recommended your website to other
players and will continue to do so. Thank you again for the great
experience!
Yours truly,
Ron DeLancey"
Unbelievable craftsmanship going on with this beauty!!
I
was honored to help be a part of this project by making a custom set of
pickup rings for Ron!!
 
I finally finished my bass project.
Attached ar a few photos.
Thanks for the pickup rings. A small
piece of the puzzle, but a critical element in achieving the look I was
going for. Prompt, simple communication, prompt turnaround time and a
quality product. What else could you ask for? Thanks.
Robert"
Roberts killer looking Bass with
custom pickup rings!
 
Brian K's USA Custom Ibanez with
Polished Stainless Steel Trem bar and Polished Aluminum Pickup Rings.
This a great guitar with the graphic
(Pile O' Skulls) finished by Dan Lawrence himself.
 
Here are pics of the rings that you
did for me.
Although the pictures may not show
it, they look GREAT!
Eric "
Eric's beautiful custom camo with
the black rings switched out for the Polished Aluminum rings.
Nicely done bro!!
 
"Hey there Dave, I bought a bunch of parts from you a few months ago. Backplates,
a whammy bar, a replacement whammy bar socket and nuts and bolts for the saddles
on my Charvel. all i can say is wow. Your parts are amazing. My guitar looks and
plays much better now. The backplates make me want to learn how to play with my
teeth just to show them off and the JT6 tremolo works much smoother now that i
have the proper bar to use it with in a now secure socket. I've attatched a
bunch of before and after shots and should you wish to include them on your site
i'd be honoured. Thanks again!!! Frazer."
Frazer's beautiful Metallic red flake
Charvel with Black Anodized D'Plate cover plates and
JT6 Tremolo parts including the
Polished Stainless Steel bar!!
   
PRS Pickup Rings
(before (neck) and after (bridge) and Truss Rod Cover in
Polished Aluminum
 
Thanks Dave!!
"Hi Dave,
Got them yesterday.
PERFECT fit and now I get to elbow grease shine the pickups
if possible. I'll take before/after pictures and send them
to you in case you want another pic on your website. Some
Orville by Gibson owners are not aware of the BIG difference
in appearance your parts make.
Thanks again,
Carl"
Before and after
shots of Carl's Orville Bass
with a set of the
T'Bird polished aluminum rings!
 
"I ordered two Bill
Lawrence L-500 pups from Bill & Becky to replace the
stock pickups of my Hamer Vector XT. When I received the pickups
I
discovered their mounting rings were not the same size than my
guitar's. I
asked Becky and she told me that they guaranteed the size for
US-made
guitars, but not for imports. Being my guitar a Korean-made axe
I thought I
was done. However, I found a reference to this site in the Hamer
Fanclub. I
contacted Dave and everything worked as a breeze from then on.
After several
emails we finally agreed on the specs. For a very reasonable
price he made
for me two black custom-sized mounting rings. Everything took
less than a
month. These rings fit perfectly to my guitar, and you can see
them now in
the pictures below. Thanks to Dave for his professionalism,
customer care
and attention to detail! And you can bet that for any custom job
related to
the hardware of my guitars I'll contact him before anyone else."
Ionel Munoz, from Montreal, Canada.
Ionel's beautiful Hamer
V:
    
Jimmy Li's very cool
Ibanez Roadstar with a set of rings in Black Matte residing in
Hong Kong:
 
"I got this XTRR around 5
years ago, and while I love the appearance, I was never
convinced by the sound. Since I got the guitar, it's had 4
different bridge pickups, and 2 neck pickups, and while each
change has brought around an improvement, it still didn't sound
great - the sound was kind of thin and the guitar just sounded
pretty dead. A friend of mine swapped the bridge in his XTRR
and was amazed by the improvement in the sound. Having got fed
up with swapping pickups, I decided to give this a try myself
and given Dave's reputation, going to anyone else never even
crossed my mind!
After much back and
forth about stud and string spacing, we established which size
bridge was appropriate, Dave cut the string slots and sent it
over to me. The bridge arrived in a couple of days (no mean
feat given that I'm in the UK) and so it was with bated breath I
installed it - I must admit, I was blown away! This bridge has
totally made this guitar come to life - it had got to the point
where the guitar was my 'last choice' XTRR because of the sound,
but now it sounds as good as, if not better than, the previously
best sounding of the 4. I'm totally sold on this bridge, and in
my opinion, Jackson should be fitting these bridges on all
string thrus!
Thanks very much Dave -
I'll be in touch soon for another bridge!
Cheers!
Ian"
Pics of Ians VERY
cool XTRR with one of my San Dimas aluminum anodized bridges
with brass saddles and stainless hardware:
   
Dave, I can’t thank
you enough….! To be able to find someone to do precise quality work
like this is fantastic.
My 1988 Jackson Is
now finished, and with the Tremol-no in place and your cover it’s
just fab. I have sent some picture to show how it all goes!!
I’ll keep plugging
you on the Tremol-no forum or anywhere else where custom built
guitar parts are needed.
All the best. And
once again thank you for putting up with my constant E-Mails for
what is such a reasonably priced piece of custom machining
Regards
Iain W.
Iain's Blue Crackle
Jackson with special plate cut for the new Tremol-no:
  
Hey Dave:
Finally got the Peavery
finished. This one has your stock HB rings you did for another guitar
we did some time ago and the single coil you made up for this. AS you
can see, much cleaner look with the rectangular ring you made than the
usual ring for STRAT styles. These rings really make those EMG's clean
looking, and the finish is dead on for them. I'm going to send this one
on to Rick at EMG also.
Another success for Frets on the
Net.
See ya friend... always
appreciate your work.
Mike.
Mike's Peavey with custom
rings!!
 
Another one of my
project guitars that wouldn’t be complete without
Daves
craftsmanship. The anodized brushed aluminum parts fit like a
glove, and were custom made for this guitar! Thanks again to
Fretsonthenet!
This is Marks VERY
interesting custom that just shows the artistic talent that he has.
I was able to provide the rear black anodized brushed aluminum
covers and neckplate he had engraved:
  
This is a
beautiful Ibanez RG that I was able to provide the owner with a set
of
Pearloid
rear covers and truss rod cover as well.
Joe's RG:
  
Mike here,
out it Sacramento where its gonna be 108F today....
Here's my
1987 Charvel model 5. Im the original owner and the restoration
went really well using your parts.
Mike
Mikes
gorgeous Model 5:
 
Tim's Peavey Bass with
replacement pickup rings:
 
|
|
