When ordering with a part number, please add G (Gold), GB (Gold brushed) or SS (stainless), SSB (Stainless Steel brushed).

Stainless Steel brushed finish for all bars unless you specify otherwise.

For example: If you'd like a Kahler Pro bar in polished Stainless Steel to match chrome, the part number would be: TB-Kpro-SS

Unfortunately black is not available on any of my bars (except for the Conversion bars below) as I don't have any black plating capabilities.

Black paint won't hold up and powder coating is too thick for the tolerancing of these bars.

Click the link for the item you'd like to see:

Original Floyd Rose:

Jackson / Charvel:

Ibanez:

Fender:

Kahler:

Washburn:

YAMAHA:

ESP:

with Allen Wrench

Washburn Wonderbar 2001 String Lock Screws

Only available in Black

(example of the string lock)

Black Only

.40 cents each

Set of 6 for $2.00

$2.00 a set

(3 screws & Wrench)

Charvel Surfcaster (JT490) Tremolo Bars!

These also fit the tremolos on the ST Models

These are the hard to find tremolo bars for the JT490 Tremolo as pictured below.

These are made from solid polished stainless steel only, and will not rust peel or chip.

TB-490

$25.00

JT490 Tremolo:

Or Sometimes known as the "ST" Tremolo:

Charvel Model Series Vintage Tremolo Bars

These are for the black vintage strat style trems as found on the Model 1, 1A, and 1C

These are made from solid polished stainless steel only and will not rust peel or chip.

TB-VIN

$28.00

Example of the Vintage Model Series Tremolo:

New Service is now available for the JT6 Jackson Logo'd Tremolos shown below:

An example of a JT6 Tremolo:

**NOTE**

Black only for Lefties

 Unfortunately these are NOT available for left handers in Chrome or Gold as I do not make these bars, I just modify the socket for the tremolo.

I can now offer a service that will allow you to mount a modern Floyd Rose type tremolo bar with the friction collar built in.

The only thing you have to do is remove your old tremolo socket and replace it with the new one that I have modified to fit the hole where your old socket went.

Click for Tutorial

No more bushings for those of you who do not like them ;o)

If you need the Allen wrench (3mm) for the installation, see below ....

$27.00 each.

If you need the Allen wrench (3mm) for the installation, I have those as well.

Ibanez Edge Tremolo Bar / Floyd Rose Conversion Bars

Tired of that bar flopping around, and you'd like to actually put into a specific position?

Now you can have the same features of the modern day Floyd Rose bar on your Edge Trem!

Please see the Jackson/Charvel Conversion bar tutorial

for the same exact installation.

Click for Tutorial

Black : TB-EDGB $30.00

Chrome: TB-EDGC $30.00

Gold: TB-EDGG $32.00

Ibanez Maxxas and Artfield "HQ" Tremolo Bar in Solid Stainless Steel

These are made from solid polished or brushed stainless steel only

There is only one type available now:

With "faux" Tip (machined groove to simulate a separate tip):

TB-HQ

$28.00

 The one with the "fake" tip is the top bar in all 3 pictures.

Examples of the HQ Bridge:

 Artfield:

 Maxxas :

Kahler Tremolo Bars

Kahler Steeler, Traditional Fulcrum, Killer, or Spyder (2700 Series) Bars

TB-KFul

$28.00

Pic of the Kahler Traditional Fulcrum: 2500 Series:

Kahler Steeler, Killer or Spyder:

TB-Kspy

$28.00

Pic of the Kahler Steeler:

Pic of the Kahler Spyder:

Pic of the Kahler Killer:

Kahler Pro, Standard, (2200/2300 Series) or Flyer Bars

These are made to be exactly as the originals were except with a much nicer finish. These are available in stainless steel or the brass and these have the same threaded configuration and the same bends for those that wanted the original style.

TB-Kpro

$28.00 each

Pic of the Solid Hardened Brass on Kahler Pro

Pictured in Polished Stainless Steel and Hardened Brass (matches gold!). It's better than chrome or gold plating because it will never chip or peel or rust! 

Kahler Bass Bars (3400 Series)

TB-Kbass

$30.00

Specifically made to the longer vintage length for the Bass Tremolo

$6.00

each screw

HWft-2B

If you're tired of looking for a bar for that System 2 or 3, I can help by supplying a modern type Floyd bar that will fit right in the existing hole in the tremolo base plate.

There are no modifications that you must make, just unscrew the nuts that are holding in the existing socket and replace it with this one.

These should actually work for the Elite and Free Flyte as well but have not tested those yet.

If you need the Allen wrench (3mm) for the installation,

$27.00 each.

If you need the Allen wrench (3mm) for the installation, I have those as well.

Fender System I Tremolo Bars

TB-SYS1

$27.00

These are made from solid polished or brushed stainless steel only and will not rust peel or chip.

Please be aware of other companies selling bars for the System one,

they are not the correct size and require permanent modification to your tremolo!

Mine are exactly like the original bar and just pop right in.

These are made from solid stainless steel and are not soft and weak.

$6.00 each screw

Also available in sets of 6 for $28.00

System 1 Fine Tuner and Tremolo Bar Repairs

Fine Tuner Repair:

If you've found that you have stripped out the threads for your fine tuners, I can easily rethread these with a slightly larger size thread

and provide a fine tuner that will function like new again. I can either do just one, or all 6 for you.

The total for this service for all 6 fine tuners would be $45.00 plus the shipping back to you.

I'll be happy to help in any way I can!

Tremolo Bar Repair / Conversions:

If you have missing or broken parts on your System 1 Tremolo, I can help get you back into action with a conversion service that I provide.

I can help you (or do it for you) give your trem new life with a modern Floyd Type Tremolo Bar!

Read below if you're mechanically inclined and you're not afraid to use power tools.

If you can use a drill and you're comfortable drilling out the tremolo socket hole in your bridge, you won't even have to send the bridge to me.

All you have to do is be able to hold your bridge in a suitable vise or clamp and drill out the existing hole to a slightly larger size.

Email  me for details!

$27.00 each.

If you need the Allen wrench (3mm) for the installation, I have those as well.

$1.00

Read this if you'd rather have me do all the work for you!

If you're not up to the task of doing it yourself, I can do it for you. All that is required is that you send the bridge to me and I'll take care of the rest for you.

Cost of the service which includes the bar is $42.00 plus the shipping back to you.

Email with any questions you may have!

System I Trem arm bushings!

$12.00 each

These are the plastic bushing that fits between the round, chrome friction nut and the arm socket in the base plate.

Angled side faces up into the Friction Collar.

The bushing is the black ring in the photo below:

Fender System Series String Lock Replacement Screws!

.40 cents each

(Locknut, not available)

Vintage Tremolo Bars and Tips

Replacement vintage tremolo arms for those long lost ones that seem to grow legs and disappear.

These are made from solid polished or brushed stainless steel only and Solid brass tips with the correct threads. Tips can also be purchased separately.

TB-DIM

$30.00 with Brass Tip 

San Dimas Tremolo Bar Tips

Wasburn Wonderbar Tremolo Bars

Washburn N2 600S Floyd Rose

TB-TRS

Available in Polished Stainless Steel only (matches chrome)

$28.00

Pictured in Polished Stainless Steel and Polished Hardened Brass (matches gold!). It's better than chrome or gold plating because it will never chip or peel or rust! These are for the Friction Collared style trems only.

TB-2001

$28.00

Washburn Wonderbar Tremolo Socket Bushings

These are the little black bushings that tighten up the trem arm when

turning the "friction" collar around the arm. 1 Required.

Angled side faces down into the Tremolo bar socket.

$12.00

The "Non-Collared" Washburn ( SHIFT ) Wonderbar Tremolo

I'm now making the tremolo bars for the "other" style model of these tremolos where they do NOT use the friction collar, as the bar just screws right in like a Strat. Example pic below.

TB-2001NC

$28.00

$20.00

Black Anodized Aluminum:

 HWwfcr-1

Washburn Fine Tuner Washers

This is a set of 6 Black Delrin Washers for the Washburn / Shift 2001 Tremolo.

These are the thin black washers that act as cushions for the fine tuners.

ESP Tremolo Bars

Nice original style tremolo bars that fit the original Logo'd ESP tremolos.

I've had some questions on this trem as I'm hearing there are 2 different sockets for these.

These are made from solid polished or brushed stainless steel only.

Here's a closer pic of the type of socket that I make the bars for:

TB-Sync

$28.00

Example of the ESP tremolo:

ESP Synclair Adapters !!

Ok, so I've been helped out by a few customers (thanks guys!) with some info on the other threaded collar type tremolo bar and unfortunately, I will not be manufacturing these bars as it's just too involved for how many requests I get for it.

But,I have made an adapter that will fit the threaded socket of the base plate, that will allow you to fit a modern Floyd type tremolo bar into it. Now I've machined these to fit a specific bar that I get from my supplier so it will match correctly. Not all of these modern Floyd type bars run the same size so you're gambling if you just want the adapter alone.

There are 2 wrench flats that will allow you to snug this into the base plate but there is no need to over tighten these.

These are hardened/heat treated steel for optimum wear.

For both the adapter and tremolo bar, the price is $40.00

For the adapter alone, it's $25.00

A reference picture of the adapter.

(yes, I know it's not the ESP bridge in the picture but I had to send the original bridge back to the customer ;o))

Here are a couple of pics for reference of the tremolo that this adapter will fit:

YAMAHA Tremolo Bars

Nice original style tremolo bars that fit the original  RM-Pro (with Pop-in Bar), RM-Pro II (with Pop-in Bar), Vintage Pro (with Pop-in Bar), and *Rockin' Magic II (Threaded Bar)*  tremolos.

These are made from solid polished or brushed stainless steel or Brass.

A note about the brass bars.

They have a slight step that can be seen in the pic below because these are a metric bar size

and I have yet to find a good (dependable / reasonable) metric source for brass roundstock.

The step does not hurt a thing, and is hardly even noticeable but I just wanted you to be aware of it.

TB-RMPro

$28.00

Fits the following 3 trems below:

RM-Pro,

RM Pro II,

Vintage Pro

 TRS Pro

TB-TRS

Available in Polished Stainless Steel only (matches chrome)

$28.00

 Rockin' Magic II

TB-RMagII

$28.00

Fits the following trem below:

Takeuchi / TRS-Pro / TRS 101

TB-TRS

Available in Polished Stainless Steel only (matches chrome)

$28.00